Heat pump Series Suppliers

The plate heat exchanger can provide users with the option of changing the processing capacity and changing the heat transfer coefficient K value or adding new functions at any time. The thermal efficiency is very high. 3. It also functions as a security alarm. And unlike the shell-and-tube type, a Heat pump Series Suppliers large space is needed to pull out the tube bundle for maintenance.. Two seals are designed on the sealing device between the plates, and a signal hole is also provided.　　

5. Due to the geometry of the flow channel and the high thermal efficiency of the two liquids, the cooling water consumption can be greatly reduced.　　 Hope that the introduction of the plate heat exchanger rubber strips can be helpful to you, follow us for more news! If you don’t understand those aspects, you can consult us and we will have professionals to answer you. Generally speaking, the heat transfer coefficient K value of the plate heat exchanger is in the range of 3000～6000W/m2.　

　6. The cooling water volume is small, which reduces the installation cost of pipes, valves and pumps. Generally, the equipment no longer needs to be insulated. It is safe and reliable to use. Once leakage occurs, it can be discharged outside the heat exchanger, which prevents the two media from mixing. Under the condition of equal heat transfer, the space occupied is only 1/2 to 1/3 of the shell and tube plate heat exchanger. Because of its compact structure and small size, the outer surface area of ​​the plate heat exchanger is also small, so the heat loss is also very small.oC.　　2. So what are the advantages of the plate heat exchanger? Let's follow the plate heat exchanger rubber strip to understand it~　　

1. Small footprint and easy maintenance: The structure of the plate heat exchanger is extremely compact. This shows that the plate heat exchanger only needs 1/2 to 1/4 of the area of ​​the shell-and-tube plate heat exchanger to achieve the same heat exchange effect. The heat loss is small. ​​Less resistance loss: Under the condition of the same heat transfer coefficient, the plate heat exchanger can control the resistance loss within 1/3 of the shell-and-tube plate heat exchanger through a reasonable selection of the flow rate

Megosztás a facebookon